Group company Austral Monsoon Building Products have recently been awarded a contract on the $1.8 billion Sunshine Coast University Hospital project for Lend Lease.
AMBP will undertake the supply and installation of Austral Monsoon AME 100 and AME 100HV 2 stage fixed ventilation louvers to various plant room areas within the project.
Group company Austral Monsoon Building Products has recently completed the $80 million Aldi distribution centre in Brendale for Cockram Constructions.
The Austral Monsoon AME 145 fixed ventilation louvre was used extensively through the project. The AME 145 can provide 60% free area whilst still providing effective weather resistance and aesthetics.
Group company Diamond Roll Up Door is presently attending and displaying at the NTEA work truck show in Indianapolis. The NTEA (The Association for the Work Truck Industry) represents approximately 1700 companies that manufacture, distribute, install, sell and repair commercial trucks, truck bodies, truck equipment, trailers and accessories.
The show is held yearly and is recognized as one of the 100 largest trade shows in the United States. Numerous leads are acquired at this show making it one of Diamond’s most important trade shows.
Richmond train station, one of the busiest railway stations in Melbourne has recently been redeveloped to meet increased commuter demand.
Working directly with the Metro Trains project development team, group company Ansa Doors supplied and installed a range of security doors including the H13 Type roller shutters and AT100 series Tilt doors.
Richmond is one of a number of railway stations, including Jewell, Essendon and Alphington, that have been earmarked for urban renewal.
Melbourne’s wholesale fruit and vegetable market has been relocated from its current location in West Melbourne to a new site in Epping. It has been redeveloped into a modern, innovative and efficient fresh produce trading and distribution precinct.
After successfully completing the supply and installation of over two hundred roller shutters to the main market complex, group company Ansa Doors has been asked to supply and install a further sixty roller shutters to the extended market buildings Part A, which surrounds the main market.
The new Melbourne Market at Epping is expected to be open from the middle of 2015.
It has been another busy month for Group Company, Dover Vanguard Roller Shutters of Oldham, UK. This month has seen more N35 Aluminium Vehicle Roller Shutters supplied to PickUp Systems for inclusion on their Commercial and Emergency Vehicles.
This long established relationship has continued to go from strength to strength and the N35 has been featured across their entire range time and time again thanks to the quality of the product.
Pictured are a few of the new vehicles manufactured by PickUp Systems with the N35 Vehicle Roller Shutters in place.
Group Company, NASSAU Industrial Doors Ltd of Stoke-on-Trent, UK are currently coming into the final tranche of supplying and installing a total of 89 different door solutions, including 47 NASSAU Sectional Doors for EM Highways Area 9 depots.
Work began on the project at the start of February and is due to be completed by the middle of March 2015 at 8 different sites across the Midlands.
Pictured are three of the sites including Telford, Coleshill and Doxey.
Group Company, Industrial Door Engineering Ltd of Cheshire, UK has just completed work on a new Car Park Shutter at Royal Mills, Ancoats, Manchester. This is just one of their many projects that they have going on at present.
The new Car Park Shutter features perforated steel lath and measures 3600mm by 2640mm in size, finished in RAL7016 anthracite grey powder coating. Operating from the new GA2515 safe drive motor; it allows almost 720 opening cycles to be performed within 24hrs making it the idea door for this Roller Shutters Manchester project. The door also features a safety bottom edge and two photocells safety beams to detect any vehicle or pedestrian that may be travelling under the door when it starts to close.
Designing the new project, Senior Sales Executive Antony Faloona travelled to the site to speak with the construction company. Analysing the work required, he produced detailed drawings of the new door which were then past to their in house CAD department to be produced for sign off before any work was completed.
The project was finished on time and on budget ready for the first tenants to drive through only a few days later. At Industrial Door Engineering they work with the customer to create a quality door solution that will become part of the landscape of the building rather than stand out against it. As you can see from the finished results this was another fantastic success for IDE and a very happy customer.