Diamond Ready for Production Run

Group Company Diamond Roll-up Door has successfully completed a pilot trailer for its customer, Kentucky Trailer. Following a highly successful inspection, Diamond is gearing up for a 220 door production run in late June.

Diamond works closely with its customers to provide innovative product solutions to the ultimate satisfaction of the end-user.

Semi-trailer doors

No customer too small for Diamond

Group company Diamond Roll-up Door Inc. recently replaced an old Diamond Master Door with an updated Evolution Door on a recreational vehicle built in the early 2000s.

Here is what our customer had to say:

“Hey guys, the new door fit my RV great. Thanks for the help with this, not many companies will take the time to help a small customer like me. While I don’t have a fleet of trucks, I will certainly tell anyone that asks how well your took care of me.

Thanks again,

Rich”

Whether the job is for an individual or a fleet, you get the same outstanding customer service.  You will speak with a sale representative who will get you a solution, not sent to a distributor who probably does not have the right product or size.

Call Diamond and try us out.

customized door for trucks, RVs and pickups

Lietzke adds to Heavy Duty Steel Louvre Door Offering

Lietzke Australia Pty Ltd, a division of the AM Group, has been supplying Heavy Duty Steel Louvre Door Units around Australia for a number of years with great success. This success has now led to the market requesting the capability of these doors to stretch further, including features such as vermin proofing, longer unsupported spans and fixed panels to match door sets.

Lietzke has met these challenges with 2 new blade designs.

The basis of the Lietzke Heavy Duty Steel Louvre Door Unit is that all materials used are pre-galvanised with all mitres in the sub-frame fully welded. The louvre blade material can range from 1.2 to 2.0mm for added security and the doors are adaptable to any locking system. Door units are supplied prime painted in a zinc rich etch primer or powdercoated in any of the standard Colorbond colour range (custom colours available upon request).

The size of door units supplied has ranged from 300mm hatch openings and louvre panels through to 4.5m high by 3.6m wide double door sets.

Most commonly each louvre door is supplied factory hung in a Lietzke BW series pressed metal door frame with matching colour.

plant room door, pump room door, high security louvrelouvres, security, ventilation, plantroom door Louvre Profile

Holdcroft Hyundai has a facelift thanks to NASSAU

Group company Nassau Industrial Doors Ltd, Stoke-on-Trent, United Kingdom has completed the installation of 6no. NASSAU 9000F manual operated sectional doors with High Lift track arrangement and 1no. Steel Hinged Door with electric strike to accept the client’s electronic access device.

The contract was won by Senior Sales Executive, Rob Spooner and was carried out on behalf of Holland Construction at the Hyundai dealership in Staffordshire, UK.

Nassau

Sectional overhead doorsIndustrial Steel Door

Multi-Plastics takes another fast acting roller door from IDE

Group company, Industrial Door Engineering have just completed the supply and installation at Multi-Plastics (Europe) Ltd of Cheshire, United Kingdom of 1 IDE 3(E) Roller Shutter and 1 Speedroller ITW Transrapid to match previous carried out in January.

The Speedroller ITW Transrapid works from a fast acting drive for maximum performance and features built in windlocks that are capable of withstanding a windload of up to 115km/h (over 70mph). For Multi-Plastics they required the addition of an induction loop, as well as all the other standard safety features, such as automatic detection of an object below and break beam technology to stop the curtain closing on anyone or vehicle in the doorway.

The contract was won by Antony Faloona, Senior Sales Executive at Industrial Door Engineering.

Speed doorRoller Shutter Repairs and ServiceIndustrial Door Installation and Service

From Paper to Site in 25hrs

When TREIF of Ellesmere Port, United Kingdom contacted group company Industrial Door Engineering about an old roller shutter than had stopped working on Wednesday afternoon they were amazed with the speed we were able to design, manufacture and fit the new one!

At 3pm on Wednesday 23rd April Antony Faloona, Senior Sales Executive arrived and diagnosed that the original Roller Shutter had come away from the barrel, damaged the motor and end plate and wouldn’t raise more than 500cm off the ground. Working against the clock to get a new door manufactured meant pulling out all the stops and by 4pm on Thursday 24th April the new IDE 3(E) Roller Shutter in Plastisol poppy red was up and fitted ready for operation.

TREIF were able to carry on working thanks to the hard work and dedication to quality and customer service that Industrial Door Engineering supply as standard.

Roller shutter service and repair UK roller-shutter-electric-001 roller-shutter-electric-005 roller-shutter-electric-027

Dover Vanguard take pride of place at CV 2014

Group company, Dover Vanguard took pride of place on not just one but four major suppliers stands at the Commercial Vehicle Show 2014 at the NEC Birmingham, United Kingdom.

Companies such as Isuzu, Toyota, Doyles and Maxi-low all featured a range of Dover Vanguard products from the 50mm Vehicle Roller Shutter to the N35 Aluminium Vehicle Roller Shutter.

Marketing Manager, Stewart Plant said “Having so many of the main exhibitors feature our products is a fantastic demonstration of how Dover Vanguard continues to lead the European market in Vehicle Roller Shutters. With this year marking the 60th anniversary since Dover was formed it is a testament to the quality of not only the product but the service we provide that we continue to be the best.”

Dover Vanguard Vehicle Roller Shutter

N35-aluminium-roller-shutter-fire-002

N35-aluminium-roller-shutter-fire-001

50mm-aluminium-vehicle-roller-shutter-002

50mm-aluminium-vehicle-roller-shutter-001

Cokebusters takes on the USA with the N35

Group company, Dover Vanguard Roller Shutters has just completed the supply of 4 N35 Vehicle Roller Shutters to Cokebusters of Chester, United Kingdom for their brand new vehicle heading to the USA that will be used on a petrochemical plant.

The new contract continues to cement the relationship between Dover Vanguard and Cokebusters and was won by Garry Cannon, Senior Sales Executive for Dover Vanguard.

automotive doors

aluminium truck door

Truck doorvehicle door

Corplex New Head Office – Setting the standards

Over the past decade, Corplex Constructions has evolved from the new kid on the block, building small townhouse complexes, into a one-stop shop for a wide variety of projects. With a broad skill set and a focus on true customer service, Corplex delivers the highest quality, time and time again.

When building their new high visibility head office in Port Melbourne Victoria, Corplex elected to engage AM Group company Ansa Doors to supply and install a high visibility bi-fold door.

Ansa Doors supplied and installed the AB-100 series Bi-fold Door. The eye-catching appearance of this door highlights the build quality and high end look Corplex were aiming to achieve.

Specialty doortilt-up doorsectional overhead door not roller door

National Roads & Motorist Association (NRMA)

Group company Austral Monsoon recently supplied and installed 2EA aluminium roller shutters for the NRMA (National Roads & Motorist Association) new roadside assistance vehicles for Sydney.

This is the first vehicle released into the field and will undergo a trial period over the coming months.

DSC_0235 (Custom) DSC_0237 (Custom) DSC_0241 (Custom) DSC_0244 (Custom)